Professional LED Strips for Architectural and Technical Lighting

CV/CC LED solutions with SMD, COB, SOB, Neon and Digital technologies for any lighting project.

Construction standard and operating principle

LED strips are available in constant voltage (CV) or constant current (CC) versions. CC models integrate a current regulation IC in each segment to maintain uniform flow over long lengths. Power options include 12 / 24 / 36 / 48 V DC and 110 / 220 VAC variants. Color configurations include 1CH (monochrome), CCT 2CH (Tunable White), RGB 3CH, RGBW 4CH and RGB+CCT 5CH (RGBWA). Control is achieved through PWM drivers or interfaces such as DALI, KNX, ZigBee, Bluetooth Mesh, Z-Wave, DMX, RF, 0–10 V / 1–10 V, enabling full dimming from minimum levels to 100%.

System architecture

  • Power supply / LED driver: DC (5 / 12 / 24 / 36 / 48 V) or integrated rectifiers for AC 110 / 220 V strips.
  • Controller / interface: Local PWM or gateway to professional protocols for scenes and automation.
  • Wiring and distribution: Power injection or multiple feed points to limit voltage drop on long runs.
  • Thermal dissipation: Aluminum profiles and thermally conductive bases for stable output and lifespan.
  • Modularity and connection: Printed cut marks, quick connectors or soldering; ultra-long and multi-line versions for large projects.

Technical features and benefits

  • Color Rendering Index (CRI): CRI 80 / 90 / 95 / 98; focus on R9 sample for red rendering.
  • TM-30-15 (IES): evaluation across 99 color samples with three indices:
    • Rf (0–100) – Fidelity Index;
    • Rg (~60–140) – Gamut Index (desaturation or oversaturation);
    • Color Vector Graphic – hue/saturation mapping across 16 sectors to detect hue shift.
    TM-30 is preferred when real color quality is critical (premium retail, museums, jewelry).
  • CQS – Color Quality Scale: alternative metric with 15 saturated colors considering preference and color discrimination.
  • CRI/efficiency trade-off: typically, higher CRI means lower lm/W efficiency due to phosphor/spectrum limits.
  • Full spectrum / TM-30: extended spectrum versions available with balanced Rf/Rg for natural rendering.
  • 99.99% gold bonding wire: used in premium LEDs for improved stability and reliability.
  • Color temperature (CCT): ~1800–6500 K; Dim-to-Warm feature warms tone when dimmed.
  • FPC (Flexible Printed Circuit): width and copper thickness (e.g., 2–4 oz) affect voltage drop, heating, and uniformity.
  • Emission uniformity: COB (Chip on Board) and SOB (SMD on Board) for continuous light with no “dot” effect.
  • Dedicated optics: wall-washing and lens series for beam control.
  • Special versions:
    • Built-in IC (CC) for uniformity over long lines.
    • Ultra-Long for extended runs.
    • Digital/Pixel with segment or per-LED addressing.
    • S-Bend for side bending.
    • FlexLite LED Panels for 2D surfaces.
    • Multi-Line with multiple LED tracks.
    • Smart thermal protection: automatic dimming with temperature rise (ideal for saunas or demanding environments).

Technologies: SMD, COB, SOB, Neon, Lens, Ultra-Long and Digital

  • SMD (e.g. 2835, 5050, 5630, 2216): wide choice of densities (LED/m) and powers (W/m).
  • COB – Chip on Board: continuous light line, no visible dots.
  • SOB – SMD on Board: ultra-dense and high-power technology, flawless uniformity.
  • Neon LED (silicone extrusion): IP65–IP68 flexible profiles with neon-like finish.
  • Wall-washing / Lens Series: micro-optics and prisms for wall-wash and beam control.
  • Ultra-Long & Multi-Line: extended lengths and multiple LED tracks for large areas.
  • Digital / Pixel: addressable for animations, gradients and effects.
  • FlexLite LED Panels: flexible luminous sheets for backlighting and signage.

Protection degrees (IP) and construction

“Open PCB” Series for indoor use

  • IP20 – Unprotected: dry environments or profiles with cover; ideal for indoor and architectural lighting.

“Manual process” Series (hand-applied gaskets/resins)

  • IP53 – Spray glue: basic protection for light humidity.
  • IP54 – Single-side silicone: silicone coating on one side.
  • IP65 – Thermal casing: heat-shrink sleeve; humid areas.
  • IP66 – Nano waterproof: nano hydrophobic coating.
  • IP67+ – High-transmittance silicone tube.
  • IP67 – Hollow casing: silicone sleeve for rain/humidity.
  • IP68 – Irrigation silicone casing: long-term wet environments.

“Extrusion process” Series (integrated silicone/PU extrusion)

  • IP67DH – Semicircular hollow extrusion.
  • IP67SH – Square hollow extrusion.
  • IP68D – Semi-circular solid extrusion.
  • IP68S – Square solid extrusion.
  • IP68PU – PU full coating extrusion.

Customization and tailor-made variants

  • Power rating (W/m): selectable within predefined ranges.
  • Color temperature (Kelvin): available gradations and dedicated binning.
  • Color quality: CRI 80/90/95/98 and TM-30-15 (Rf/Rg) profiles on request.
  • Lengths/segments: special reels, ultra-long versions.
  • IP grade and coatings: choose from manual/extrusion variants.
  • FPC: width and copper thickness optimized for power and length.

Typical applications

  • Residential & hospitality: coves, furniture, rooms, spas with Tunable White dimming.
  • Retail & showcases: product enhancement, RGB/RGBW scenography.
  • Offices & corporate: diffuse light with CCT, meeting scenes, comfort lighting.
  • Architectural & outdoor: facades, perimeters, wayfinding, neon-like and wall-washing.
  • Industrial & signage: functional lines, info panels, digital strips for dynamic messages.

Available versions and specifications

  • Power supply: 12 / 24 / 36 / 48 V DC; integrated 110 / 220 V AC options.
  • Electrical topology: CV (resistors) and CC (IC per segment).
  • FPC: multiple widths, 2–4 oz copper for low loss.
  • LED density: from low to ultra-high (>240 LED/m).
  • Specific power: from few W/m to over 50 W/m.
  • Optics: ~120° (SMD/COB), continuous (SOB/Neon), variable (Lens).
  • Chromaticity: 1800–6500 K, full spectrum, CCT / RGB / RGBW / RGBWA.
  • Control: PWM, DALI, DMX, KNX, ZigBee, Bluetooth Mesh, Z-Wave, RF.
  • Accessories: aluminum profiles, diffusers, connectors, clips, sealants, power supplies.

Energy efficiency class (EU ErP)

  • A ≥ 210 lm/W
  • B ≥ 185–209 lm/W
  • C ≥ 160–184 lm/W
  • D ≥ 135–159 lm/W
  • E ≥ 110–134 lm/W
  • F ≥ 85–109 lm/W
  • G < 85 lm/W

Chromatic types and configurations

  • 1CH Monochrome: white (WW/NW/CW) and saturated colors (red, green, blue, amber, UV); Dim-to-Warm variants.
  • CCT 2CH (Tunable White): warm/cool balance for visual comfort and ambient scenes.
  • RGB 3CH: primary color mixing for decorative or architectural effects.
  • RGBW 4CH: RGB + dedicated white channel for pure whites and high CRI.
  • RGB+CCT 5CH (RGBWA): color + dynamic white for maximum chromatic flexibility.